1. When turning on the machine the following message appears:
Non-System disk or disk error
Replace and strike any key when ready
Replace and strike any key when ready
Solution:
There is a diskette in your A:\ drive that needs to be removed.(On all old PC with a diskette drive.)
There is a diskette in your A:\ drive that needs to be removed.(On all old PC with a diskette drive.)
2. When booting the machine the following message appears:
Windows was not properly shut down. One or more of your disk drives may have errors on it. Press any key to run ScanDisk on these drives.
Solution:
The machine did not use the shut down sequence. Press the enter key and allow the machine to do a scan. If it finds lost clusters to repair, click on the OK to let it do self-repairing. You do not need to save these so select DELETE or Don’t Save when asked to make a choice.
The machine did not use the shut down sequence. Press the enter key and allow the machine to do a scan. If it finds lost clusters to repair, click on the OK to let it do self-repairing. You do not need to save these so select DELETE or Don’t Save when asked to make a choice.
3. During your work session the following message appears:
Not enough memory/ Insufficient memory:
Solution:
1. There are too many programs opened at the same time. Close some and try again.
2. Memory leaks have probably occurred. Reboot the machine.
Today's Featured Car
Jun Nakayama
Telephone Skype : +81-50-5539-9816 begin_of_the_skype_highlighting +81-50-5539-9816 end_of_the_skype_highlighting
FAX : +81-34-578-9623
Homepage : http://www.prosperjp.com
