Karibu PROSPER !: Monitor won’t work

March 2, 2012

Monitor won’t work

First check the power chord and the cable that connects to the CPU. If these are firmly seated and there is still no display, the video card may be defective or the least needs to be re-seated. Pull out all the plugs and wires connected to the CPU and open it. Try to remember the place where the monitor is connected and you get the video card. Remove the said card by unscrewing it from the casing and removing or sliding any retention tabs that was supposed to prevent it from pulling loose. Pull it out while taking care not to remove any of the other wires that are in the CPU unit itself. Check for any visible damage such as burn marks or a smell that I assure you that you won’t soon forget. Any of those signs and get packing for you are getting a new one. If unsure of the type (there are several types of video cards), bring the one you pulled out as a basis. When at the store, try getting something either equal to or better than the one you have. When you get home, touch the CPU power supply to again discharge static and re-install the aid card. Remember to re-attach any cable or fan power supply you might have had to pull out to get access. Re-assemble the unit and boot up(you might have to install the drivers of the new card if you were unable to get the same type and brand).

Today's Featured Car